|
Automated Chain Link Fence Equipment Capacity 80-120 m2/hour
Automatic Chain Link Fence Machine
1. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes.
2. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
Feature
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.
Use compacting machine to make it into rolls.
Specification
Capacity | 80-120(m2/hour) |
Wire Diameter | 2.0-4mmFeeding Wire Numbers: two |
Size of Mesh | 30x30-100X100(mm) |
Netting Width | 600-4000(mm) |
Power and Rated voltage | 9.0KW 380V,50HZ |
Dimensions | 3700*1430*1800mm 2100*1700*1250mm |
Automatic Chain Link Fence Machine / Diamond Mesh Machine / Wire Diameter 2-4mm
Description
1. The chain link fence machine adopt the principle of weaving double wire from Germany, though the production efficiency is high and the quality of mesh sheet is reliable.
2. The machine can produce chain link fence with both Galvanized Wire and PVC Coated wire
Application
Chain Link Fence which produced by Chain Link Fence Machine is extensively used as fences for playground and gardens, highway, railway, airport, port, residence etc.
Feature
Easy to operate, advanced technology, low price, good quality.
Specification
Capacity | 80-120(m2/hour) |
Wire Diameter | 2.0-4mmFeeding Wire Numbers: two |
Size of Mesh | 30x30-100X100(mm) |
Netting Width | 600-4000(mm) |
Power and Rated voltage | 9.0KW 380V,50HZ |
Dimensions |
3700*1430*1800mm
|
Automatic Chain Link Fence Machine Equipment / Netting Width 2000mm / 380v
Automatic Chain Link Fence Machine
1. One side or both sides of the end of net
2. hole is twisted
3. with burr in edge.
4. 1.8-4.0mm
5. The chain link is automatically wound to form rolls when the desired length is manufactured.
Feature
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.
Use compacting machine to make it into rolls.
Capacity | 80-120(m2/hour) |
Wire Diameter | 2.0-4mmFeeding Wire Numbers: two |
Size of Mesh | 30x30-100X100(mm) |
Netting Width | 600-4000(mm) |
Power and Rated voltage | 9.0KW 380V,50HZ |
Dimensions | 3700*1430*1800mm 2100*1700*1250mm |
Tel: 86--18631814662
Fax: 86-318-7599992